Ceramix
Ceramix is used to handle low to high viscosity multi component materials. They can be filled as well as abrasive. Due to its compatibility and modularity, two or more ceradis single component piston metering systems can be connected by simply using a mixing block onto the outlet of which a plastic mixer is mounted. Just a suitable material supply and metering unit is required. The material can be processed by either shot dispensing or continuous flow.
Technical Specifications
-
Flow rate
10 to 2.000 mm³, at MR 100:100
-
Mixing ratioup to 100:1, depending on shot size and viscosity
-
Mixing systemStatic mixing system
-
Material supplyDrum pump, material pressure vessel or cartridge
-
Viscosity range
0,5 to 50.000 mPa s, higher on request
-
Material characteristicsunfilled, filled, abrasive
-
Power supply230 V / 50 Hz / 16 A
-
Air inlet pressure6 bar, only for material supply
-
Dimensions120 x 60 x 300 mm
-
Weightapprox. 7,0 kg